cheap ADATA 1GB DDR2 667 CL5.0 16 CHIP

Search for:

Subscribe for our weekly mega deals

PC Components
Graphics Card
Hard Drives
Memory
DDR3 ModulesDDR2 ModulesDDR ModulesECC/Buffered ModulesSODIMM (Laptop / Notebook)SDR Modules
Motherboards
Processors (CPUs)
Multimedia & I/O
Fans & Cooling
Cables & Tools
Cases & Power Supplies
CD/DVD Drives/Writers

PC Components»Memory»DDR2 Modules

ADATA 1GB DDR2 667 CL5.0 16 CHIP

	o-1gb-667-cl5-16-vdata-ds-B

Product No: 7086

£ 8.82
inc VAT price: £ 10.15
In stock: 24

Like all SDRAM implementations, DDR2 stores memory in memory cells that are activated with the use of a clock signal to synchronize their operation with an external data bus. Like DDR before it, DDR2 cells transfer data both on the rising and falling edge of the clock (a technique called "dual pumping"). The key difference between DDR and DDR2 is that in DDR2 the bus is clocked at twice the speed of the memory cells, so four words of data can be transferred per memory cell cycle. Thus, without speeding up the memory cells themselves, DDR2 can effectively operate at twice the bus speed of DDR.

DDR2's bus frequency is boosted by electrical interface improvements, on-die termination, prefetch buffers and off-chip drivers. However, latency is greatly increased as a trade-off. The DDR2 prefetch buffer is 4 bits deep, whereas it is 2 bits deep for DDR and 8 bits deep for DDR3. While DDR SDRAM has typical read latencies of between 2 and 3 bus cycles, DDR2 may have read latencies between 4 and 6 cycles. Thus, DDR2 memory must be operated at twice the bus speed to achieve the same latency.

Another cost of the increased speed is the requirement that the chips are packaged in a more expensive and more difficult to assemble BGA package as compared to the TSSOP package of the previous memory generations such as DDR and SDRAM. This packaging change was necessary to maintain signal integrity at higher speeds.

Power savings are achieved primarily due to an improved manufacturing process through die shrinkage, resulting in a drop in operating voltage (1.8 V compared to DDR's 2.5 V). The lower memory clock frequency may also enable power reductions in applications that do not require the highest available speed.

Alternative products at ±10% price


ADATA 1GB DDR2 667 CL5.0 08 CHIP OEM Product No: 132473	Adata	490	£8.82 inc. vat 10.14


ADATA 1GB DDR2 667 CL5.0 16 CHIP RET Product No: 223684	Adata	1	£8.82 inc. vat 10.14


TRANSCEND 1GB DDR2 800 CL5.0 08 CHIP RET JETRAM Product No: 100151		550	£9.68 inc. vat 11.13


TRANSCEND 1GB DDR2 800 CL5.0 16 CHIP RET JETRAM Product No: 102800		2	£9.68 inc. vat 11.13


TRANSCEND 1GB DDR2 667 CL5.0 08 CHIP JETRAM RET Product No: 100150		204	£9.68 inc. vat 11.13


TRANSCEND 1GB DDR2 667 CL5.0 16 CHIP RET JETRAM Product No: 102667		10	£9.68 inc. vat 11.13

Products from the same brand


VDATA 2GB DDR2 800 CL5.0 16 CHIP Product No: 721531	Adata	56	£16.54 inc. vat 19.02


ADATA 2GB DDR2 800 CL5.0 DUAL CHANNEL KIT RET Product No: 227130	Adata	48	£23.72 inc. vat 27.28


ADATA 1GB DDR2 800 CL5.0 08 CHIP Product No: 222625	Adata	1	£6.96 inc. vat 8


ADATA 2GB DDR2 800 CL4.0 DUAL CHANNEL KIT RET EXTREME EDITION Product No: 0947	Adata	1	£23.72 inc. vat 27.28


ADATA 512M DDR2 800 CL5.0 08 CHIP Product No: 161454	Adata	1	£7.62 inc. vat 8.76


ADATA 4GB DDR2 800 CL5.0 DUAL CHANNEL KIT RET Product No: 222446	Adata	8	£39.72 inc. vat 45.68

SHOPPING CART

cart is empty

home | FAQs | contact us